How to Pair Soundcore Earbuds (2023)

If you’re on the hunt for a pair of good-quality earbuds, you’ve probably heard of soundcore. This brand’s product range is unlike any other, and their audio products offer immersive and enjoyable listening experiences at affordable prices. The soundcore earbuds, in particular, are easy to operate as well. 

Have you recently purchased this product? Are you trying to figure out how to pair soundcore earbuds? Well, look no further. This article will explain how you can pair them with different devices. We’ll take you through the steps for each method in detail.

Read on to find out more!

 

What Does Pairing Mean? 

“Pairing” refers to connecting two Bluetooth-enabled devices together. For example, soundcore earbuds use Bluetooth technology to connect to media devices. To connect two devices to each other using Bluetooth, you must pair them. After the devices have been paired, they are described as “linked devices.” They will not need to be paired again unless either device is reset. 

 

How to Pair Soundcore Earbuds

The process of pairing soundcore earbuds is straightforward and similar to the pairing process used by other Bluetooth devices. There are only slight differences depending on the type of device you are connecting your earbuds to. 

Next, we’ll explain how you can pair your soundcore earbuds with different devices. We’ll also review the specific steps for a few popular soundcore products. Look through the list to see which device method applies to you.

NOTE: Depending on which model of soundcore earbuds you have, the button you press to put them into pairing mode may differ from the instructions below. The rest of the instructions will remain the same.

 

Method#1: How to Pair Soundcore Earbuds with iPhone

To pair your soundcore earbuds with your iPhone, follow these steps: 

1. Turn on your earbuds. To do this, you must remove the earbuds from their case.
2. Check the right earbud for the power button. 
3. Press and hold this button to put the device in pairing mode. 
4. Open Bluetooth settings on your iPhone. 
5. Turn on Bluetooth. Your iPhone will start scanning for available devices.
6. From the list of Bluetooth devices, choose soundcore earbuds. 
7. You’ll know your earbuds have been paired with your iPhone if the LED flashes a blue light.

 

Method#2: How to Pair Soundcore Earbuds with iPad

To pair your soundcore earbuds with your iPad, follow these steps: 

1. Turn on your earbuds. To do this, you must remove the earbuds from their case.
2. Check the right earbud for the power button. 
3. Press and hold this button to put the device in pairing mode. 
4. Open Bluetooth settings on your iPad. 
5. Turn on Bluetooth. Your iPad will start scanning for available devices.
6. From the list of Bluetooth devices, choose soundcore earbuds. 
7. You will know your earbuds have been paired with your iPad if the LED flashes a blue light. 

 

Method#3: How to Pair Soundcore Earbuds to Mac

To pair your soundcore earbuds with your Mac, follow these steps:

1. Turn on your earbuds. To do this, you must remove the earbuds from their case.
2. Check the right earbud for the power button. 
3. Press and hold this button to put the device in pairing mode. 
4. On your Mac, click the Apple logo in the screen’s top-left corner.  
5. Select System Preferences. 
6. Click the Bluetooth icon to turn on Bluetooth. 
7. The name of your soundcore earbuds will appear in the Other Devices section. 
8. You will receive a message asking if you want your Mac to pair with the soundcore earbuds. Select Allow.
9. You’ll receive a notification on your computer when the devices have been paired.

 

Method#4: How to Pair Soundcore Earbuds to Android

To pair your soundcore earbuds with your Android device, follow these steps: 

1. Turn on your earbuds. To do this, you must remove the earbuds from their case.
2. Check the right earbud for the power button. 
3. Press and hold this button to put the device in pairing mode. 
4. Turn on Bluetooth on your Android Device. 
5. You should see the name of your soundcore earbuds in the list of available devices.
6. Select your soundcore earbuds. 
7. You’ll know your earbuds have been paired successfully if the LED flashes a blue light.

 

Method#5: How to Pair Soundcore Earbuds with Windows 10 Computer

To pair your soundcore earbuds with a computer running Windows 10, complete the following steps: 

1. Turn on your earbuds. To do this, you must remove the earbuds from their case.
2. Check the right earbud for the power button. 
3. Press and hold this button to put the device in pairing mode. 
4. On your computer, go to Bluetooth & other devices in Settings. 
5. Choose the option that says “Add Bluetooth Device.”
6. You’ll see the name of your soundcore earbuds in the list of discoverable devices.
7.  Select your soundcore earbuds.
8. Next, you’ll receive a message asking if you wish for the devices to be paired. Click Yes. 
9. You’ll know your earbuds have been paired successfully if the LED flashes a blue light.

 

How to Pair Specific Soundcore Earbuds Models

Method#1: For Soundcore Liberty 3 Pro, Soundcore Liberty Air 2 Pro, and Liberty Air 2 Earbuds

1. Open the earbuds’ case. Don’t take the earbuds out.  
2. Press and hold the button located on the back of the case for 4-5 seconds. This will put the earbuds in pairing mode. 
3. The LED light will flash white.
4. Open the Bluetooth settings on your device. 
5. You will see the name of your soundcore earbuds in the list of available devices.
6. Select the name of your soundcore earbuds to connect them.
7. Depending on your device, you may receive a message asking if you wish for the devices to be paired. Click Yes. 
8. You’ll know your earbuds have been paired successfully if the LED flashes a blue light.

 

Method#2: For Life P3, Life P2, Life A2 Earbuds 

1. Open the earbuds’ case. Do not take the earbuds out.  
2. Press and hold the button located in the back for 3 seconds. This will put the earbuds in pairing mode. 
3. The LED light will flash white.
4. Open the Bluetooth settings on your device. 
5. You will see the name of your soundcore earbuds in the list of available devices.
6. Select the name of your soundcore earbuds to connect them.
7. Depending on your device, you may receive a message asking if you wish for the devices to be paired. Click Yes. 
8. You’ll know your earbuds have been paired successfully if the LED flashes a blue light.

 

Why Aren’t My Soundcore Earbuds Pairing? 

There are many reasons your soundcore earbuds might not be pairing correctly. Perhaps there’s a problem with the pairing mode on the earbuds. The Bluetooth feature on the device you’re connecting to may also be a problem. As there are so many possibilities, it can be difficult to know what’s causing the issue. However, a simple reset can solve most glitches and connectivity issues. 

 

How to Know If You Should Reset Your Soundcore Earbuds

You may need to reset your soundcore earbuds if:

1. Your earbuds won’t connect to your phone or laptop.
2. You can’t find your soundcore earbuds in the list of discoverable Bluetooth devices on your phone or computer.
3. Your earbuds keep disconnecting. 
4. Your earbuds won’t charge.
5. The audio quality of your earbuds has been affected, but they aren’t visibly damaged. 
6. The audio coming from your earbuds is delayed. 
7. The earbuds have connected, but there is still no audio.

 

How to Reset Your Soundcore Earbuds

The method to reset your soundcore earbuds may vary slightly depending on the type and model of your earbuds. However, the general process for resetting your earbuds is quite simple.

1. First, locate the power button on the earbuds. 
2. Press and hold the power button until the LED flashes a blue, green, or red light. The color of the light depends on the model of your soundcore earbuds. 

 

Final Thoughts

The pairing method for most soundcore products is straightforward. However, there may be slight variances depending on the model of your soundcore earbuds. The process will also differ according to the type of device you’re connecting the earbuds with. 

In this article, we’ve explained the methods for pairing your soundcore earbuds with different devices. We’ve also discussed the steps you need to follow for certain earbuds models in particular. Hopefully, this information helps you to successfully connect your soundcore earbuds to your desired device!