Sony TV Won’t Turn On: 8 Fixes (2023)

Sony is one of the largest and most successful corporations in the world. Although this tech giant manufactures many products, Sony TVs, in particular, are amongst the most well-renowned for their quality, reliability, and value for money. However, even high-quality products can run into issues from time to time. 

Sony TV Won’t Turn On: 8 Fixes (2023)

If your Sony TV isn’t turning on, then you’re at the right place! In this article, you’ll find the answers to all your questions. We’ll walk you through the different methods to help you solve this problem, so you won’t have to worry about a thing. If that sounds like something you’re interested in, read on to find out more!


Table of Contents

Why Won’t My Sony TV Turn On?

There are many reasons why your Sony TV may not be turning on. Depending on the cause of the problem, the solution method you’ll follow will be different. We’ll discuss the reasons first. Go through the list and check if anything applies to your situation. 


Reason#1: Cables Aren’t Properly Plugged In

It is possible that your Sony TV won’t turn on because the cables aren’t plugged in correctly. This could mean the wires are loose or plugged into the wrong ports. You should be concerned with the following wires: 

  1. The AC Power Cord 
  2. The HDMI cable
  3. Other types of component cables


Reason#2: Faulty Power Outlet

In many cases, if your Sony TV is not turning on, this indicates a power issue. The problem may be with the power outlet. If the power outlet that your TV is connected to can’t provide power, then your Sony TV won’t turn on. Check if this is the issue in your case.


Reason#3: Faulty Remote Controller

If your Sony TV isn’t turning on, an unresponsive remote may be at fault for the issue. In this case, there is no problem with the TV itself. A remote controller may become unresponsive because of excess charge build-up in the internal circuit. In that case, it will need to be reset. We’ll explain the steps for this in the next section. A TV remote control can also become unresponsive if the batteries in the remote are dead.


Reason#4: Damaged Cables

Your Sony TV may not turn on if the cables attached are damaged. Inspect the AC power cord, the HDMI cable, and any other component cable for signs of damage. If the wires are old, they may need replacement even though there is no visible damage. 


Reason#5:  Faulty TV Backlight

A tv backlight can stop working due to many reasons. This could include water damage, drop damage, or defective internal components. If the backlight on your Sony TV isn’t working, you’ll see a blank screen when you turn on your TV.


Reason#6: Hardware Issue

If none of the above reasons apply to your situation, there may be an issue with the internal components of the TV. If this is the case, there is little you can do yourself. You’ll have to call a technician to fix your problem.


Sony TV Won’t Turn On: 8 Fixes


Fix#1: Check Cables

If your Sony TV won’t turn on, inspecting the cables is the first thing you should do. Check if the cables are plugged in correctly. If they aren’t, plug them in and then try to turn on the TV. The placement of the wires is also important. Ensure that they’re plugged into the correct ports. 

If your Sony TV turns on after this step, there is no issue with the TV itself. You should check that the cables are not loose if this issue persists. 


Fix#2: Power Cycle your Sony TV

Power cycling your TV is the easiest way to fix several types of issues that you may face with your Sony TV. Power cycling refers to performing a simple reset. It’s important to understand that a reset differs from simply turning the TV on and off. Let’s go over the steps for this method. 

To power-cycle your Sony TV, complete the following steps:

  1. First, turn off the TV. 
  2. Then, unplug it from the power outlet. 
  3. Leave the Sony TV unplugged for 1 minute.
  4. Press the power button on your Sony TV for 30 seconds.
  5. Plug your Sony TV back into the power source. 
  6. If power cycling your Sony TV has fixed the issue, the TV will start working.


Fix#3: Input Setting

If your TV is set to the incorrect input settings, it may appear as if it isn’t turning on. In this case, the TV has turned on but will appear as if it hasn’t. Check the input settings on your Sony TV using your remote controller. If the input settings are incorrect, change them to the correct ones. 


Fix#4: Try Another Power Source

Before moving on to the other solution methods, check if the issue is with your TV’s power outlet. Connect the TV to a different power source or outlet and check if the problem is resolved. 


Fix#5: Reset TV Remote

If the cables or power source are not the issue, you can try to reset your TV remote.

To reset your TV remote, complete the following steps:

  1. Open the battery compartment on the back of the remote control. 
  2. Remove the batteries. Wait for 1 minute
  3. Press the power button on the remote control for 3 seconds.
  4.  Reinsert the batteries.
  5. Turn on the TV again.

If the issue is resolved, the remote control likely stopped working due to the charge build-up. There is no issue with the TV itself. However, if this issue keeps coming up, you might have a faulty remote. 


Fix#6: Replace the Remote or Replace the Batteries

If resetting the remote does not fix the issue, the batteries may have died. Try replacing them with new batteries to see if the problem is fixed. You may also have a faulty remote control. If this is the case, you’ll have to get it replaced to correct the problem. 

To check if the remote control is the issue, try turning on the TV using the power button. This button is usually found on the side of the TV. 


Fix#7: Replace the Cables

If the power cord has been damaged, you’ll need to replace it to turn on the TV. Ensure that the power cord you buy is compatible with your TV model. It may be helpful to consult a technician before you make a purchase. You can also refer to the instruction manual that arrived with your Sony TV.


Fix#8: Check the TV Backlights

If the issue is with the backlights of your TV, there is a straightforward way to check this. All you need to do is complete the following steps:

  1. Ensure that the TV is plugged in. 
  2. Press the power button.
  3. Look at the back of your TV. The backlights are working if you can see white lights shining through the holes in the panel.
  4. You may also check to see if you can hear any audio. 


Final Thoughts

There are many reasons your Sony TV may not be working. It may happen because of problems such as power supply issues or defective equipment. Depending on the cause of the problem, the method that’ll work for you will be different. However, in this article, we’ve explained all the different techniques you can try to fix this issue. In most cases, one of these methods can fix the problem.

However, if none of the above methods work for you, it may be time to contact Sony customer support. In most cases, Sony will send a technician to your house to fix the problem. And if your TV is still under warranty, you can save a lot of money!