How to Fix Verizon Router Yellow Light (2022)

Verizon Fios Routers and extenders claim to be one of the fastest and most efficient routers today. It uses a 100% fiber-optic connection and Wi-Fi 6 technology—the latest Wi-Fi standard for most wireless connections. Similar to other routers, it indicates its status through its LED light.

How to Fix Your Verizon Router Yellow Light (2022)



However, users have experienced the Fios router yellow light issue. This happens when their Verizon Fios router shows a solid yellow light while on. In this guide, we’ll show you why your Verizon router shows a yellow light and how to fix the Fios extender solid yellow problem.


Table of Contents

“Why is My Verizon Router Yellow?” — Most Common Reasons

Your Verizon Fios router or extender can turn yellow for various reasons. It’s mostly related to bugs on your Fios router or a network outage from the ISP. Here are the most common reasons why your Verizon router shows a yellow light:

  • Network Outage – Verizon can sometimes have sudden or scheduled outages. When this happens, your Fios router won’t receive an internet connection, showing a yellow light on its LED indicator. Click here to learn more about Verizon’s service outages.
  • Faulty Ethernet Cable – Another factor that can lead to the Fios router yellow light issue is a faulty Ethernet cable. It can be damaged due to wear and tear or other external factors. If you see a tear on the wires or its connector is damaged, contact Verizon Support to get it fixed.
  • Overheating Issue – If you see a yellow light on your Verizon router and its surface is hot at the same time, it may be caused by overheating. The router can quickly underperform or malfunction in extreme temperatures. If it has a battery, disconnect it first, then cool it down for a few minutes.
  • Fios Extender is in Pairing Mode – Your Fios extender will show a solid yellow light when it’s ready to pair with your Fios router. When paired with your router, it should turn from yellow to a blinking blue light.


How to Fix Verizon Fios Router Yellow Light Issue

As mentioned earlier, the first troubleshooting step that you can do is to check all cable connections. Check the WAN and LAN Ethernet cables for wear and tear, including the power cable. Also, check if the ports on the router are in good condition; brush away any dust or debris that is stuck inside the ports to have a snug connection.

If all cable connections on your Fios router have no problems, try following the fixes below. Remember to review each fix individually and see which is effective on your Verizon Fios router and extender.


Fix #1: Power Cycle Your Verizon Router

Your Verizon Fios router can show a yellow light when it has bugs and glitches. Power cycling your router is an immediate and risk-free solution since it re-initializes your router’s internal components. 

To power cycle your Verizon router, follow these steps:

  1. With your Verizon router turned on, unplug its power cable from the socket.
  2. Wait for one minute to drain its power.
  3. Plug the power cable back in and wait for the router to switch on. See if the router’s indicator light shows a white color.
  4. Check your devices for an internet connection.


Fix #2: Relocate Your Router

If your router often overheats even after power cycling, consider relocating it to a cool environment. Avoid placing it near heating instruments, direct sunlight, or vents since they can cause your router to heat up quickly and underperform.

Also, if your router has backup batteries, check if it’s damaged. Faulty batteries can quickly overheat and damage your Verizon router. You can get them replaced by contacting Verizon Support.


Fix #3: Pair Both Your Verizon Router and Extender

If your Fios extender shows a solid yellow light, it’s still attempting to pair with your router. To pair both devices, press and hold the front buttons of the extender and router for five seconds to enter pairing mode. When it shows a blinking blue light, both devices are paired successfully.


Fix #4: Place Your Extender at an Optimal Distance

If your Verizon extender shows a blinking yellow light, it’s related to its distance from the router. If it blinks fast, your extender is too close to the router. Otherwise, it will blink slowly when it’s too far from the router. 

Try placing your extender at an optimal distance until it shows a solid yellow light. Then, you can start pairing them to end the Verizon extender yellow light problem.


Fix #5: Reset Your Verizon Router

If all fixes don’t work, your last resort is to reset your Verizon router. It restores all configurations to their factory defaults, including settings you may have accidentally changed. 

To reset your Verizon router, follow these steps:

  1. With your Verizon router switched on, find the reset pinhole button at the back of your router. It should be placed above the Power port.
  2. Using the sharp edge of a pin or a similar object, press and hold the button for twenty seconds. The router will now turn off and reset.
  3. Once finished, set up your Verizon router and check if the Verizon Fios yellow light issue is fixed.

If none of these fixes work, we have a more recent article on How to Fix Fios Router Yellow Light.

Final Thoughts

Verizon Fios routers are one of the most reliable internet devices compared to its competitors. It features fast download and upload speeds, purely fiber optic connections, and uses Wi-Fi- 6 technology.

However, you can experience the Verizon Fios yellow light problem once there’s a connection issue on your router or extender. Hence, this guide hopefully helps you to fix your Fios router and extender once it shows a solid yellow light. If the fixes above didn’t help, contact Verizon Support for further assistance.