Roku is one of the most reliable streaming devices for smart TVs, consoles, computers, etc. If you purchase a Roku device, it will always come with a free Roku remote. To use the remote effectively, you’ll need to first pair it with your Roku streaming device.
However, some users have reported that their Roku remote is flashing green light. This normally happens when your Roku remote is in pairing mode. In this guide, we’ll show you why your Roku remote is blinking green light and how to fix it. Read on to learn more.
Table of Contents
Several factors can contribute to the Roku remote green light issue. These factors are surprisingly obvious but can be hard to find out, even if you’re a longtime Roku user. Here are common reasons why your Roku remote is flashing green light:
- Low or Dead Batteries – On average, your Roku remote’s batteries can last up to three to six months under normal use. If they exceed the said period, there’s a great chance that you’ll experience glitches and bugs on your Roku remote.
- Roku Device and Remote are Not Synced – To use your Roku device, you’ll need to pair or sync it’s remote the right way. Hardware errors such as the Roku blinking green light issue can occur once it’s not paired properly. If you cannot find the pairing button on the remote, please read How to Sync Roku Remote Without a Pairing Button.
- Faulty Roku Remote – It’s also possible for your Roku remote to sustain hardware damage over time. The remote that comes with your Roku device has a life expectancy of around 5 years and can be prone to damage to its internal components. When this happens, it’s best to replace your damaged Roku remote with a new one.
If your Roku TV has a blinking red light, then it may have the go.roku.com/lowpower low power issue and needs maintenance. A solid red light indicates that your Roku device is overheating and you should turn it off immediately.
A flashing white light on your Roku covers a lot of different faults. Please read the linked article for more info.
When going about this problem, first make sure that your Roku remote has operational batteries. If they’re older than three months, you can consider replacing them with a new one. Then, you can check if it works normally or not.
Important: After ejecting the old batteries on your Roku remote, wait for ten seconds before plugging in the new set of batteries. This is to reset the internal components of your Roku remote and also to avoid bugs.
If it still has the same issues, proceed to these fixes below. Make sure to go over every fix and see which one worked the best for you.
Fix #1: Power Cycle Your Roku Device
Power cycling is always a great first step when solving bugs such as the Roku remote blinking green light problem. However, we’ll also combine this fix with the previous fix. To power cycle your Roku device, follow these steps:
- Unplug the new batteries on the Roku remote.
- Next, with your smart TV turned on, switch off your Roku device and unplug it from its power source.
- Once it’s turned off, you can now plug the new batteries back into your Roku remote. Ensure that each battery is plugged in the right directions (positive to positive, negative to negative).
- Your remote should now flash a green light. Plug your Roku device back into its power source and turn it on.
- Wait for both the remote and Roku device to pair successfully.
- See if the Roku remote works well with your Roku streaming device.
Power cycling is also a good first step if the sound is out of sync on your Roku.
Fix #2: Factory Reset Your Roku Device
Another solution that you can consider is factory resetting your Roku device. This resets most configurations and data on your Roku device to its factory state. Bugs such as inconsistent wireless connections to its remote can be easily fixed by doing a factory reset.
To factory reset your Roku device, find and press the Reset button on its bottom or back side. If it has a pinhole design, use a small pin to push the button forward. Upon pressing it, hold for ten seconds until you see a reaction on the LED indicator light of your Roku device.
Fix #3: Install the Roku App on Your Smartphone
Another popular solution for this problem is to use your smartphone as a temporary remote for your Roku device. Depending on your smartphone, download the Roku app on your phone’s dedicated App store. Once it’s installed on your phone, pair it with your Roku device; you can now use it as a remote.
This app provides a new set of features on your Roku device when you use your phone as a remote. One workaround that you can do is to pair your Roku remote manually.
Fix #4: Manually Pair Your Roku Remote
If your Roku device still fails to recognize the Roku remote, you can pair it manually via Settings. Using your smartphone as a temporary remote, follow these steps below:
- Navigate to Settings > Remotes & Devices > Pair new device and select Remote. It should now start searching for a nearby Roku remote.
- With your Roku remote turned off, plug in its batteries. Then, press and hold the Pairing button on the remote for five seconds.
- Wait for your Roku remote to be detected automatically.
If you cannot get the remote to work, and you cannot use your Roku TV, we have a guide on how to turn on your Roku TV with a remote.
Roku devices are a great option when looking for a quality streaming device to pair with your smart TV. It supports various streaming apps and has an array of live and on-demand TV shows and movies. However, you’ll need a working Roku remote to use the device with ease.
Hence, these fixes can hopefully help you in solving the Roku remote blinking green light issue. If you’re still facing the same problems, you can try to buy a new Roku remote online.